SMART Engine Lapping System – Basic

SMART Engine Lapping System

An easier way to break in your engine

Touch Panel

Control all of the settings with the touch panel. Animations and Parameter Data will be available during the operating.

SMART System

The system is integrated with a Touch Panel for an easier and user-friendly operating experience. All of the parameters can be adjusted with the touch panel flawlessly and saved for your next break-in. SMART System is not only customizable for a personal break in preference, but it also includes a Parameter Safety Warning to ensure your Parameter Setting is in a "Safe Range". For the hardware, the system had built in sensors to detect the system is working in good conditions as always and it will be warning the user once the system detected any unusual issues.

Automation

Automate the break in process with a modern way

Flexible Parameter

The flexibility of a professional tool is important to user preference

Time Control

Anytime, anywhere. Setup the break in progress to suit your schedule

Safety

Integrate with a Safety program to ensure your parameters are in a "Safe Range"

Heatsink with heater

A special heatsink is included with an internal heater to heat up your engine without external tools.

*Only available in Oil Running

Inlet & Outlet

Specially designed Inlet and Outlet port that fits most of the engines in the market and prepares your engine seamlessly.

*Only available in Oil Running

Heavy-duty Motor

A clamp-style adapter is included connecting your engine to the heavy-duty lapping motor in an easier way.

Oil FIlter

Filter up the oil before going into your engine. This is one of the most important features of this system, keep the oil clean to avoid any unexpected damage to the engine during break in.

*Only available in Oil Running

SWITCHABLE MODULE

You can switch between Oil Running Module and Oil Bath Module with only one main device.

Removable Cover

Blocking the oil from the engine while the system operating. Monitoring the engine through the transparent material cover.

*Only available in Oil Bath

Oil Heater

Heating and controlling the oil temperature for your break in preference.

Built In Oil Pump

Built-in oil pump for the refill and redrawing of the oil without external tools.

Fuses

The system is protected by fuses, the fuses will prevent the system from overcurrent of an electrical circuit.

Dimensions

Height : 153mm

Depth : 224mm (Oil Running)

Depth : 150mm (Oil Bath)

Width : 334mm

Included Item

SMART Engine Lapping System

Instruction Manual

Spare Fuses

Fuel Line

Adjustable Parameter

Engine Heating Temperature

Engine Cooling Temperature

Oil Heat Temperature

RPM (MAX 650 RPM)

RPM Based On Time

Duration

Number of Cycles

Overheat Protection

Cutoff RPM

Compatibility

21. Nitro Engine

12. Nitro Engine (Required 1/10 engine mount)

Requires

Nitro Engine

Synthetic Oil (at least 1L)

Power Supply (min 20A & 12V – 13.8V)

Description

Engine Break In is one of the precise and patient-needed procedures for a new nitro engine. Our main objective is to develop a worry-free, reliable, and convenient system for Nitro RC Hobbyists. So we are glad to announce another new Engine Break-In System from us which is named SMART Engine Lapping System.

SMART Engine Lapping System offered a switchable module between the Oil Bath Break In Method and Running Oil Break In Method, you can select a specific module for your preference.

Main Features:

SMART System – The system is integrated with a Touch Panel for an easier and user-friendly operating experience. All of the parameters can be adjusted with the touch panel flawlessly and saved for your next break-in. SMART System is not only customizable for a personal break in preference, but it also included the Parameter Safety Warning to ensure your Parameter Setting is in a “Safe Range”. For the hardware, the system had built-in sensors to detect the system is working in good conditions as always and it will be warning the user once the system detected any unusual issues.

Included 2 Mode – Mode 1 is designed for idle RPM your engine at the beginning of break in. In Mode 2, you can adjust each stage of lapping RPM and Duration, the system will increase the RPM smoothly according to the parameter. The Continuous option is available for operating the Mode 2 automatically after Mode 1 is done.

Oil Filter – Filter the oil before going into your engine. This is one of the most important features of this system, keep the oil clean to avoid any unexpected damage to the engine. *Only available in Oil Running

Built-in heater and fan cooler – To control your engine temperature in a faster and accurate way. Heating the engine to a specific temperature before each operating is very important to a new engine. Piston and Linear can be damaged if the temperature is not reached the operating temperature. The system will also cool down the engine to a specific temperature after each operating. Cooling down a hot engine may take a long time, the included cooling fan can be done this quicker and reliable than manually. Temperature control is one of the keys in the engine break in process.

Fuses and Firmware Upgrade Port – Fuses protected all the hardware in the system to prevent any unexpected issues. Keep your system updated with a communication cable. The system’s firmware is upgradable, we will launch a new firmware to all the users if there are bug fixes needed or new features available.

Customizable Parameter – Engine Break In preference may be variant to any user from the field, so the flexibility of the system is important for a professional tool. The adjustable parameters are designed from our experience and a ton of testing in this project to make sure all necessary parameter is available in the system.

Oil Running

$ 698
  • Touch Panel
  • SMART System
  • Temperature Sensors
  • Oil Heater
  • Engine Heater
  • Fan Cooler
  • Oil Filter
  • Special Designed Inlet & Outlet
  • Built-In Oil Pump
  • Fuses Protection

Oil Bath

$ 838
  • Touch Panel
  • SMART System
  • Temperature Sensors
  • Oil Heater
  • Engine Heater
  • Built-In Oil Pump
  • Fuses Protection

FAQ

Basically both Basic and Premium version SMART Engine Lapping System offers the same firmware and features. The main difference between the two systems is the Premium version included additional CNC aluminum plates and Safety Cover.

To place on order, simply add the items you would like to purchase to your cart and proceed to checkout. We do not accept phone or email orders at this time.

We offer worldwide shipping, but due to the current pandemic, we are not able to ship to certain countries. In order to find out the shipping rates and whether we are shipping to your country, please do check out your cart and it will automatically be identified!

Yes! If you’re looking to buy from local agents & dealers, please refer to this link to find the updated list of agents and dealers we have globally.

Agent and Dealer List

Yes, you may be charged additional custom fees, VAT or duties upon import of your order to your home country. At this moment, we are not able offer a DDP or Delivered Duty Paid.

Our products will come with 1 year Factory Defect Warranty from the date of purchase. Please register your product on the Product Warranty Registration page after login your account. 

My Account > Log In / Register Account > Footer > Warranty Registration